What is the cause of the oil leakage of the electric hoist reducer
Electric hoist reducer, gearbox, etc. are all very important parts. Once some conditions occur, the entire lifting system will be paralyzed. You should always pay attention to protecting the reducer, gearbox and other equipment. What is the cause of oil leakage? Woolen cloth? Let's take a look together.
1: There is a pressure difference between the inside and outside of the reducer
During operation, the temperature of the reducer rises due to frictional heat or the influence of the environment, and the place where there is no ventilation will cause blockage, and then the pressure will increase, the temperature inside the machine will increase, and it will overflow from the gap.
2: The design is unreasonable
If it is not an electric hoist produced by a professional manufacturer, some reducer designs are just reluctant to look at the past, but are not well designed and do not comply with national standards, which will lead to various non-compliance during use, resulting in failure to use.
3: Too much oil added
After the reducer has been used for a period of time, it needs to be filled with oil. If too much oil is added at one time, the oil will be agitated during operation and too much oil will splash out.
4: The oil stain is not clean
Since every inspection and repair needs to be cleaned up, there must be a lot of oil stains on it and need to be cleaned up.
