The basic elements that should be mastered when using wire rope hoist
There are many components of wire rope hoist, and now the lifting equipment on the market is divided into two types of single speed and double speed. You can choose a lifting device that meets the requirements according to your actual needs, and bring you an efficient lifting process while ensuring the integrity of the cargo and the safety of the staff. Let’s take a look at this type of Essentials for the use of equipment.
Instructions for using wire rope hoist
First of all, after the equipment is bought, it needs to be installed correctly before use, so first of all, we must pay attention to the installation location, remember to select the operating environment that meets the standard for installation according to the size and characteristics of the entire lifting equipment.
Second, after confirming that the installation is correct, you can start the equipment for the relevant empty car trial operation. At this time, you should observe the wire rope hoist to see if there is abnormal noise or other abnormal phenomena. If you find it, you must stop the operation and eliminate it. After that, it can be restarted again.
Third, for many indicators and parameters in the trial operation, corresponding records should be taken, such as dynamic load test and static load test.
Fourth, when it is determined that all parameters and performance indicators are no problem, you can really start using this type of equipment at this time. Remember that during normal operation, you cannot exceed the specified load, nor can you exceed the rated limit per hour. Closing times.
Fifth, any equipment may have different fault problems or wear states after being used for a period of time. At this time, a perfect maintenance plan should be formulated to do the corresponding repair work for the wire rope hoist.
Sixth, for mechanical equipment, lubrication measures are very important. During inspection or maintenance, it is necessary to observe whether the transmission part has sufficient lubrication status. When lubricating it, it is strictly prohibited To apply directly by hand, a professional brush tool must be used.
Seventh, the use of wire rope hoist, remember that you can not hang the relevant lifting device and other tools in the middle of the sky and leave, the staff need to put all the tools in the specified position before leaving after each operation Work site.
Now that this type of equipment has been widely used, I hope that through the brief introduction above, we can help you better understand the basic matters that you need to pay attention to during the operation of the wire rope hoist, so that in the later use process, make more Wise decisions and correct steps.
