How to maintain the service life of electric hoist
The quality of the early production determines the service life of the electric hoist, but if you want to extend the life of the electric hoist in the later stage, it is inseparable from good protection and maintenance. Proper protection and maintenance can not only extend the service life, but also increase the flexibility of the electric hoist.
There are many restrictions on the use of electric hoists. Test runs are generally required before they are used, and they can be used normally after a series of standard no-load operations. Regarding electric hoists, it is important to protect the two parts of the brake and reducer. The two are important parts of the electric hoist, as well as accessories that are prone to problems. We should check the protection regularly, and repair and replace them if they are damaged.
The maintenance work of the electric hoist is divided into the maintenance during the installation and the maintenance during the post-installation operation. In order to ensure the normal operation of the new device or the removal of the electric hoist, no-load operation must be carried out. It is not possible to conduct energized work before the device is debugged, and it can be energized and unloaded after the device is debugged. Regarding the protection and maintenance of the electric hoist in use, once the electric hoist is found to be abnormal, it is necessary to record the operation of the electric hoist in time Each numerical value, and then perform technical analysis to ensure that the rated load is below the load required for debugging. At the same time, pay attention to protecting the cleanliness of the oil, to ensure that the oil is clean and free of impurities during the operation of the electric hoist, and the amount of oil is moderate.
To sum up, it is very necessary to improve and standardize the protection and maintenance procedures of electric hoists. The electric hoist must be scientifically debugged before use, and then the brake and reducer must be checked and repaired during maintenance. This is the case for a long time. It can greatly extend its service life and increase power.
